To upgrade a previously purchased series c model, To order a series c mode with the -web option – ProSoft Technology 5201-DFNT-ASCII User Manual
Page 3
ProLinx Modules with Ethernet Ports
Series C ProLinx™ modules with Ethernet ports do NOT include the HTML Web Server.
The HTML Web Server must be ordered as an option. This option requires a factory-
installed hardware addition. The HTML Web Server now supports:
8 MB file storage for HTML files and associated graphics files (previously limited to
384K)
32K maximum HTML page size (previously limited to 16K)
To upgrade a previously purchased Series C model:
Contact your ProSoft Technology distributor to order the upgrade and obtain a Returned
Merchandise Authorization (RMA) to return the unit to ProSoft Technology.
To Order a Series C mode with the -WEB option:
Add -WEB to the standard ProLinx part number. For example, 5201-MNET-MCM-WEB.
ProLinx Plus with Radio
The following Information and warnings pertaining to the radio must be heeded:
A
"THIS DEVICE CONTAINS A TRASMITTER MODULE, FCC ID: SDZ-WA-1.
PLEASE SEE FCC ID LABEL ON BACK OF DEVICE."
B
"THIS DEVICE USES AND INTERNAL COMPACT FLASH RADIO MODULE AS
THE PRIMARY RADIO COMPONENT. THE COMPACT FLASH RADIO MODULE
DOES NOT HAVE AN FXX ID LABE. THE COMPACT FLASH RADIO MODULE
HAS NO USER SERVICABLE PARTS."
C
"THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT
VAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
D
THIS DEVICE AND ANY RADIO ACCESSORY SOLD BY PROSOFT MUST BE
INSTALLED BY AN AUTHORIZED PROFESSIONAL INDUSTRIAL RADIO SYSTEM
INTEGRATOR. FURTHER, ONLY RADIO ACCESSORIES SOLD BY PROSOFT
AND SPECIFICALLY TESTED FOR USE WITH THIS DEVICE MAY BE USED
WITH THIS DEVICE.
E
THE USER OF THIS EQUIPMENT CANNOT BE WITHIN 20 cm. FROM THE
RADIATING ELEMENT DEVICE.
F
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO
OPERATE THE EQUIPMENT.
Industry Canada Requirements:
A
"THIS DEVICE HAS BEEN DESIGNED TO OPERATE WITH AN ANTENNA
HAVING A MAXIMUM GAIN OF 24 dB. AN ANTENNA HAVING A HIGHER GAIN IS
STRICTLY PROHIBITED PER REGULATIONS OF INDUSTRY CANADA. THE
REQUIRED ANTENNA IMPEDANCE IS 50 OHMS."