Downloading a file from pc to the module – ProSoft Technology 5201-MNET-ASCII User Manual
Page 35
MNET ♦ ProLinx Gateway
Modbus TCP/IP Protocol Configuration
Modbus TCP/IP Interface Module
Driver Manual
ProSoft Technology, Inc.
Page 35 of 78
September 1, 2010
2.8
Downloading a File from PC to the Module
1 Verify that your PC is connected to the gateway with a null-modem serial
cable connected to the serial port on your PC and the serial port on the
gateway
2 Open the P
ROJECT
menu, and then choose M
ODULE
.
3 On the M
ODULE
menu, choose D
OWNLOAD
.
Wait while ProSoft Configuration
scans for communication ports on your PC. When the scan is complete, the
Download
dialog box opens.
4 Select the
PORT
to use for the download.
5 Click the D
OWNLOAD
button.
Note: If you change the IP Address, you must cycle power to the gateway for the change to take
effect.