ProSoft Technology 5201-MNET-ASCII User Manual
Page 40
Advertising
![background image](/files/866211/content/doc040.png)
Diagnostics and Troubleshooting
MNET ♦ ProLinx Gateway
Driver Manual
Modbus TCP/IP Interface Module
Page 40 of 78
ProSoft Technology, Inc.
September 1, 2010
1 Click to configure the connection. On the Connection Setup dialog box, select
a valid com port or other connection type supported by the gateway.
2 Verify that the null modem cable is connected properly between your
computer’s serial port and the gateway. A regular serial cable will not work.
3 On computers with more than one serial port, verify that your communication
program is connected to the same port that is connected to the gateway.
If you are still not able to establish a connection, contact ProSoft Technology for
assistance.
Advertising
This manual is related to the following products: