Nikon D500 - Manual (Page 136)

136 Menu Guide
Add a comment to new photographs as they are taken.
Comments can be viewed as metadata in ViewNX-i or
Capture NX-D. The comment is also visible on the shooting data
page in the photo information display. The following options
are available:
• Input comment: Input a comment as described on page 39.
Comments can be up to 36 characters long.
• Attach comment: Select this option to
attach the comment to all subsequent
photographs. Attach comment can be
turned on and off by highlighting it and
pressing
2. After choosing the desired
setting, press J to exit.
D
Image Sensor Cleaning
Dust off reference data recorded before image sensor cleaning is
performed can not be used with photographs taken after image
sensor cleaning is performed. Select Clean sensor and then start
only if the dust off reference data will not be used with existing
photographs.
A Image Dust Off Reference Data
The same reference data can be used for
photographs taken with different lenses or
at different apertures. Reference images can
not be viewed using computer imaging
software. A grid pattern is displayed when
reference images are viewed on the camera.
Image Comment
G button
➜ B setup menu