Canon EOS 1D X Mark II - Manual (Page 122)

122
Responding to Error Messages
What to check on the transmitter
 Is another device on the transmitter network using the same
IP address as the transmitter?
 Change the transmitter’s IP address to avoid using the same
address as another device on the network. Otherwise, change the
IP address of the device that has a duplicate address.
 If the transmitter’s IP address is set to [Manual setting] in network
environments using a DHCP server, change the setting to [Auto
setting] (p.34).
What to check on the transmitter
 The transmitter’s proxy server setting is [Enable]. Is this the
correct setting?
 If no proxy server is used, set the proxy server setting to [Disable]
(p.39).
 Do the transmitter’s [Address setting] and [Port No.] settings
match those of the proxy server?
 Configure the transmitter’s proxy server address and port number
to match those of the proxy server (p.39).
 Are the transmitter’s proxy server settings correctly entered
on the DNS server?
 Make sure the proxy server’s [Address] is correctly entered on the
DNS server.
23: Duplicate IP address
24: No response from proxy server