Canon EOS 1D X Mark II - Manual (Page 8)

8
The following precautions are provided to prevent harm or injury to
yourself and others. Make sure to thoroughly understand and follow
these precautions before using the product.
If you experience any malfunctions, problems, or damage to the
product, contact the nearest Canon Service Center or the dealer
from whom you purchased the product.
Safety Precautions
Warnings:
Follow the warnings below. Otherwise, death or
serious injuries may result.
 To prevent fire, excessive heat, chemical leakage, explosions, and electrical shock,
follow the safeguards below.
• Do not insert any foreign metallic objects into the electrical contacts of the
equipment, accessories, or connecting cables.
 Do not use the equipment where there is flammable gas. There is a risk of explosion
or fire.
 If you drop the equipment and the casing breaks open to expose the internal parts,
do not touch the exposed parts. There is a possibility of electrical shock.
 Do not disassemble or modify the equipment. High-voltage internal parts may cause
electrical shock.
 Do not store the equipment in dusty or humid places. This is to prevent fire or
electrical shock.
 Before using the equipment on board airplanes or in hospitals, make sure use is
permitted. Electromagnetic waves emitted by the equipment may interfere with
instrumentation or medical equipment.
 Do not hold the camera in the same position for long periods of time. Even if the
camera does not feel too hot, prolonged contact with the same body part may cause
skin redness or blistering due to low-temperature contact burns. Using a tripod is
recommended for people with circulation problems or very sensitive skin, or when
using the camera in very hot places.
Cautions:
Follow the cautions below. Otherwise, physical injury
or property damage may result.
 Do not leave the equipment in a hot car interior or near high-temperature objects.
The equipment may become hot and cause burns if touched.
 Do not leave the product in a low-temperature environment for an extended period of
time. The equipment will become cold and may cause injury when touched.
 Do not cover or wrap the transmitter with a cloth. This may trap heat inside, posing a
risk of fire.
 Do not use paint thinner, benzene, or other organic solvents to clean the transmitter.
This poses a risk of fire and may be hazardous to your health.