Canon EOS 1D X Mark II - Manual (Page 29)

29
The instructions in this chapter are continued from page 27.
This is a connection mode available when using an access point
compatible with WPS. In PIN code connection mode (PIN mode), an 8-
digit identification number specified on the camera is set at the access
point to establish a connection.
 Even if there are multiple access points active in the surrounding
area, a relatively reliable connection can be established using this
shared identification number.
 It may take approx. one minute to establish a connection.
1
Select [Connect with WPS].
2
Select [WPS (PIN mode)].
 Select [OK] and press <0> to go to
the next screen.
3
Specify the PIN code.
 At the access point, specify the 8-digit
PIN code displayed on the camera’s
LCD monitor.
 For instructions on setting PIN codes
at the access point, refer to the
access point’s instruction manual.
 After the PIN code is specified, select
[OK] and press <0>.
Connecting via WPS (PIN Mode)