Connecting to a detected network manually, Age 31 – Canon EOS 1D X Mark II User Manual

Page 31

Advertising
background image

31

The instructions in this chapter are continued from page 27.

Establish a connection by selecting the SSID (or ESS-ID) of the access
point to connect to from a list of active access wireless LAN terminals
nearby.

1

Select an access point.

Turn the <5> dial to select the
access point to connect to from the
list of access points.

(1) SSID
(2) An icon is displayed if the access point is encrypted
(3) Channel used

[Refresh] and [Manual settings]

Scroll down the screen in step 1 to display [Refresh] and [Manual
settings
].

To search for access points again, select [Refresh].

To configure settings for the access point manually, select [Manual
settings
]. Enter the SSID using the virtual keyboard and then
configure settings following the instructions displayed.

Connecting to a Detected Network Manually

Selecting the Access Point

(1)

(2) (3)

Advertising