Menu items n option – Sharp PN-V602 User Manual

Page 26

Advertising
background image

E

26

Menu Items

n

OPTION

DATE/TIME SETTING
Set the date and time. Press

or

to select the date

and time, and press

or

to change the numerical

values.

Set the date in “Day/Month/Year” order.

Set the time on a 24-hour basis. (Factory default)
DATE/TIME FORMAT
Sets the date/time display format.

DATE .................. MM/DD/YYYY

DD/MM/YYYY

YYYY/MM/DD

(YYYY: Year, MM: Month, DD: Day)

TIME ................... Select 12- or 24-hour time.
SCHEDULE (See page 29.)
You can turn the power on/off and change the screen

brightness at a specified time.
INPUT SELECT
Select the input mode to be used in PC D-Sub input terminal,

PC/AV DVI-D input terminal, PC/AV HDMI input terminal and

PC RGB/AV component input terminals.

For D-SUB, select SET after selecting the input mode, and
then press

MENU

.

D-SUB and BNC cannot be set to AV COMPONENT at the

same time.

If D-SUB is set to AV VIDEO, the AV VIDEO input terminal

cannot be used for BNC.
AUDIO SELECT
Selects the terminal used to input audio signals in each input

mode.
INPUT SIGNAL (PC D-SUB/PC RGB)
If a computer connected to the PC D-sub/PC RGB input

terminal outputs any of the following resolutions, make a

selection from the following options.

480 LINES .......... AUTO, 640x480 or 848x480

768 LINES .......... AUTO, 1024x768, 1280x768, 1360x768 or

1366x768

1050 LINES ........1400x1050 or 1680x1050

ZOOM2 SPECIAL SETTING (See page 29.)
SCAN MODE (AV input)
Sets the scan mode used for AV mode input.

MODE1 ............... Over-scan display

MODE2 ...............Under-scan display

MODE3 ............... Under-scan display when the input signal

is 1080i/p. Otherwise, over-scan display

POWER MANAGEMENT
POWER MANAGEMENT determines whether or not to

switch modes from no signal to the input signal standby

mode.
COLOR SYSTEM (AV S-VIDEO/AV VIDEO)
Select the color system of the AV equipment which is

connected to AV S-video and AV video input terminal. (AUTO /

PAL / PAL-60 / SECAM / NTSC3.58 / NTSC4.43)

When AUTO is selected, the color system is automatically set

according to the input signal.

AUDIO OUTPUT(RCA)
Sets the volume of sound output from the audio output

terminals. When set to VARIABLE2, audio is not output from

the external speaker terminals.

VARIABLE .......... You can adjust the volume using VOLUME.

FIXED ................. Disables volume adjustment and fixes the

sounds.

When the PN-ZB02 (optional) is attached:

VARIABLE1 ........ You can adjust the volume using VOLUME.

VARIABLE2 ........ You can adjust the volume using VOLUME,

but audio is not output from the external

speaker terminals.

FIXED ................. Disables volume adjustment and fixes the

sounds.

AUDIO LEVEL(STEREO MINI)
Selects the maximum audio input level of the audio input

terminal.
SELF ADJUST
On a PC D-SUB/PC RGB screen, specify whether to

perform screen adjustment automatically or not. When ON

is selected, the screen is automatically adjusted when its

resolution is 800 x 600 or higher and the timing of input

signals changes. “ADJUSTING” appears on the screen

during the adjustment. For images with black edges, etc.,

depending on the signal, adjustment may not be possible.

In this case select OFF. (Perform manual adjustment of the

screen.)
AUTO INPUT CHANGE
Specify whether to change inputs automatically. When ON is

selected and no signal is present in the selected input mode,

AUTO INPUT CHANGE automatically changes the selected

mode to another mode where a video signal is present.

When video signals exist in multiple input modes, the

switching priority is as follows:

PC D-SUB, PC HDMI, AV HDMI, AV COMPONENT and AV

VIDEO
When the PN-ZB02 (optional) is attached:

PC DVI-D, PC HDMI, PC D-SUB, PC RGB, AV DVI-D, AV

HDMI, AV COMPONENT, AV S-VIDEO and AV VIDEO

(Input mode switching may take 15 seconds or more,

depending on the connected equipment. Input signals

may not be detected properly and a priority may change,

depending on the connected equipment or video signals.)
FAN SPEED
Sets the rotation speed of the fan.

As this number increases, the rotation speed becomes

faster. When set to AUTO, the rotation speed of the fan will

change depending on the internal temperature.
SIZE
Selects screen size. (See page 20.)
MUTE AUDIO
Can temporarily turn off the volume.
INFORMATION
If you press

, monitor information can be checked.

Advertising
This manual is related to the following products: