Xiaomi Mi Robot Vacuum-Mop P - Manual (Page 13)

1. Flip the vacuum-mop over and
pinch the clips to remove the
brush cover.
2. Remove the brush and the brush
bearing.
3. Use the cleaning brush to clean
the brush.
4. Reinstall the brush and its
bearing, then put back and press
down the brush cover until it locks
into place.
Note: It is recommended to replace the brush every 6–12 months for optimal
cleaning effectiveness.
Clips
Brush Cover
Brush
Brush Bearing
Filter
To clean the filter in the dust
compartment and 2-in-1 dust
compartment with water
tank, remove it as indicated
in the diagram.
Brush
It is recommended to replace the side brush every 3–6 months for
optimal cleaning effectiveness.
• After rinsing the filter with water, make sure it is thoroughly
dry when reinstalling the filter into the dust compartment or
2-in-1 dust compartment with water tank.
• To prevent the filter from becoming clogged, it is recommended to
regularly clean the filter using the cleaning brush.
• It is recommended to replace the filter every 3 to 6 months.
Periodically remove and clean the side brush.
Side Brush
Clean the cliff sensors every three months using a soft cloth.
Cliff Sensors
Cliff Sensors
11