Roland TD-02K V-Drums Electronic Drum Kit - Manual (Page 15)

15 15
Configuring the Detailed Settings
Parameter Value Explanation
CR2Usage
CR2
If you want to expand the drum set, use the CR2
connector of the dedicated connection cable as CR2.
* For an example of expanding the drum set,
refer to “Expanding your drum set” (p. 16).
RDB
If you want to expand the drum set, use the CR2
connector of the dedicated connection cable as RIDE
BELL.
FootSpSens -10–+10
Adjusts the amount of how easy to make the foot splash.
Adjust this if the foot splash is triggering unintentionally when you’re using a hi-hat pedal other than the
one that was included.
VH Set –
When using a VH-10 or VH-11 hi-hat, adjust the offset on this unit.
This is necessary in order to correctly detect open/close operations and pedal movement.
For details on the settings, refer to “Adjusting the Offset of the Hi-Hat (VH-10/VH-11)” (p. 16).
ADVANCED
Ø
“Making detailed
settings in ADVANCED”
(p. 17)
Moves to a screen where you can make more detailed adjustments for the pad.
5 . Press the [ ] (DRUM KIT) button to return to the DRUM KIT screen.
PAD Type list
Used Pad Type
Rim
shot
Bell hit Choke
KD-A22 KDA22 – – –
KD-200 KD200 – – –
KD-180L KD180L – – –
KD-140 KD140 – – –
KD-120 KD120 – – –
KD-85 KD85 – – –
KD-10 KD10 – – –
KD-9 KD9 – – –
KD-8 KD8 – – –
KD-7 KD7 – – –
KT-10 KT10 – – –
KT-9 KT9 – – –
KT-1 KT1 – – –
PDA120L PDA120L µ – –
PDA100L PDA100L µ – –
PD-128 PD128 µ – –
PD-125X PD125X µ – –
PD-125 PD125 µ – –
PD-108 PD108 µ – –
PD-105X PD105X µ – –
PD-105 PD105 µ – –
PD-85 PD85 µ – –
PDX-100 PDX100 µ – –
PDX-12 PDX12 µ – –
PDX-8 PDX8 µ – –
PDX-6 PDX6 µ – –
PD-8 PD8 µ – µ
PD-4 PD4 – – –
VH-11 VH11 µ – µ
Used Pad Type
Rim
shot
Bell hit Choke
VH-10 VH10 µ – µ
CY-16R-T CY16RT µ µ µ
CY-15R CY15R µ µ µ
CY-14C-T CY14CT µ – µ
CY-14R-T CY14RT µ µ µ
CY-14C CY14C µ – µ
CY-13R CY13R µ µ µ
CY-12C-T CY12CT µ – µ
CY-12C CY12C µ – µ
CY-12R/C CY12R/C µ µ µ
CY-8 CY8 µ – µ
CY-5 CY5 µ – µ
BT-1
BT1 – – –
BT1 SENS *1 – – –
RT-30K RT30K – – –
RT-30HR RT30HR µ – –
RT-30H
RT30H SN *2 – – –
RT30H TM *3 – – –
RT-10K RT10K – – –
RT-10S RT10S µ – –
RT-10T RT10T – – –
*1: When using the BT-1, it is possible to further increase the
sensitivity for soft strikes, but this increases the possibility of
unwanted triggering by vibration from the surroundings.
*2: Select this if you attach an RT-30H to the snare.
*3: Select this if you attach an RT-30H to a tom.