Connecting external equipment, Turning the power on/off, P. 6) – Roland TD-02K V-Drums Electronic Drum Kit User Manual

Page 6: Turning the power on, Turning the power off, Quick start

Advertising
background image

6

6

Quick Start

Turning the Power On

1 .

Connect headphones or amplified speakers

to the TD-02.

* If amplified speakers are connected, minimize the

volume of the amplified speakers.

* To prevent malfunction and equipment failure, always

turn down the volume, and turn off all the units before

making any connections.

2 .

Press the [

Ā

] (POWER) button.

The power to the TD-02 is turned on.

3 .

If amplified speakers are

connected, turn on the power of

the amplified speakers, and adjust the

volume.

4 .

Use the [

Ć

] [

ć

] (VOLUME)

buttons on the unit to

adjust the volume.

Turning the Power Off

1 .

If amplified speakers are connected to the

unit, minimize the volume of amplified

speakers and turn off their power.

2 .

Long-press the [

Ā

] (POWER) button on the unit.

The power to the TD-02 is turned off.

* You must turn off the power by long-pressing the [

Ā

] (POWER)

button. The settings are not saved if the power supply is

disconnected due to the power cord getting pulled out.

Turning the Power On/Off

Using the Auto Off Function

The power to this unit will be turned off automatically after

a predetermined amount of time has passed since it was last

used for playing music, or its buttons or controls were operated

(Auto Off function). If you do not want the power to be turned
off automatically, disengage the Auto Off function (p. 19).

NOTE

¹

Unsaved data is lost when the power turns off. Before

turning the power off, save the data that you want to keep.

¹

To restore power, turn the power on again.

Connecting External Equipment

* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any

connections.

* Be careful not to get your fingers pinched by the movable parts when you operate the drum sound module holder. If using

this in a location where children are present, be sure to provide adult supervision or guidance.

TD-02

DC IN jack

Connect the included AC adaptor to

this jack.

MIX IN jack (Stereo)

Connect your audio player or

smartphone here. You can perform

along with a song that’s playing on

your smartphone or other

mobile device.

Ø

“Playing Along with a Song

from Your Mobile Device”

(p. 11)

OUTPUT/PHONES jack

Outputs the sound. Connect

headphones or an amplified

speaker.

Bluetooth ADAPTOR jack

Connect a BOSS

Bluetooth

®

Audio MIDI

Dual Adaptor (BT-DUAL: sold separately)

to play along with the song you hear

on your smartphone that’s connected

wirelessly.

Ø

“Attaching the

BT-DUAL” (p. 11)

USB COMPUTER port

If the unit is connected to

your computer via a USB cable

(commercially available), you can

transmit and receive MIDI and audio

data.

Ø

“Using This Unit with Computer

Software” (p. 13)

TRIGGER INPUT connector (rear)

Connect the included dedicated

connection cable to this connector, and

use it to connect the pads and pedals.

Advertising