Epson DS-1630 Flatbed Color Document Scanner User Manual
Page 29
29
Note:
Make sure your scan job settings are set up correctly in Document Capture Pro before scanning
with the Epson Network Interface Unit.
1.
Press the
OK
button on the Epson Network Interface Unit.
2.
On the LCD screen of the Epson Network Interface Unit, select the computer you want to send the
scanned file to and press the
OK
button.
Note:
If your scanner is part of a network group, make sure to set the computer to the same network
group or it will not appear on the LCD screen.
3.
If you set up a password in Document Capture Pro, enter the password at the prompt.
4.
Select a scan job and press the
OK
button on the Epson Network Interface Unit.
5.
Press the
start button on the scanner or Epson Network Interface Unit.
Your original is scanned and the file is sent to the computer you selected.
Parent topic: