Asus ProArt Display OLED PA32DC 31.5" 4K HDR Monitor - Manual (Page 18)

2-2
Chapter 2: Setup
2.2 Attaching the stand (arm/base)
To assemble the stand:
1. Carefully take the monitor out of the box. Hold the monitor firmly and do
not press on the panel screen when lifting to avoid any accidental damage
(Figure 1).
2. Have the front of the monitor face down on a table. Then using a paperclip
(or similar item), remove the rubbers covering the screw holes (Figure 2).
3. Install the arm and secure it using the screws (Figure 3).
4. Attach the base to the arm. Then lift the screw ring and turn it clockwise to
secure the base in place (Figure 4).
(Figure 1)
(Figure 4)
(Figure 3)
(Figure 2)
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• When the panel screen is facing down, be careful not to damage the
Menu (5-way) button.