Asus ProArt Display OLED PA32DC 31.5" 4K HDR Monitor - Manual (Page 38)

3-12
Chapter 3: General Instruction
• Key Lock : Selects “On” to disable all function keys. To cancel the Key
Lock function, press the Close button for more than five seconds. See
page 1-2 for the location of the Close button.
• Power Indicator : Turns the power LED indicator on/off.
• Ambient Effect : Configures the ambient effect settings.
» Light Effect: Adjusts the brightness level adaptively.
» Adaptive Color: Adjusts the color temperature adaptively.
This function will be disabled if the HDR function is enabled and the
ProArt Preset setting is set to HDR_PQ DCI, HDR_PQ Rec2020,
HDR_HLG BT2100, HDR_HLG DCI, or HDR_DolbyVision.
• Proximity Sensor : If the function is enabled and the system does not
detect the presence of object within 30cm-1.5m over the preset time, the
system will automatically decrease brightness periodically.
• Recovery time would be within 2 seconds.
• The function of the sensor and the detectable distance will change
with the reflection condition of the platform surface on which the
display is placed (the weaker the reflection, the better) and the
surface reflection condition of the detected object (the stronger the
reflection, the better).
• Please avoid placing objects in front of the sensor (between 30
cm and 1.5 m), as it will cause the function of the sensor to fail
(misjudging that someone is ahead).
• Screen Protection : Ensure the life cycle of panel by decreasing brightness
gradually.
This function will be disabled if the ProArt Preset setting is set to
HDR_PQ DCI, HDR_PQ Rec2020, HDR_HLG BT2100, HDR_HLG DCI,
or HDR_DolbyVision.
• Information : Shows the monitor information.
• All Reset : Selects “Yes” to revert all settings to the factory default mode.