Teac AP701 Stereo Power Amplifier (Black) - Manual (Page 13)

EN
13
Dimmer
You can change the brightness of the level meters.
The dimmer switch (
¦ ) has three positions. The switch position sets
the brightness as follows.
Position Brightness
BRIGHT Bright
Normal
DARK Dim
Changing level meter operation
The METER gain switch has three positions. The switch position sets
the operation as follows.
Position Operation
+20 +20 dB
Normal
OFF Off
o When level meter operation is +20 dB, needle movement will be
greater than usual.
Switching inputs
The INPUT selection switch has two positions. The switch position sets
the input as follows.
Position Input
XLR XLR
RCA RCA
V
Do not switch this when the unit is on.
Failure to do so could result in sudden loud noises
that could damage speakers and harm your hearing.
Automatic power saving function
This unit has an automatic power saving function.
If the automatic power saving function is set to on, the unit will
automatically enter standby mode if there is no audio input for
about 30 minutes.