Waves CLA MixHub Software Plug-In - Manual (Page 11)

CLA MixHub / User Guide
11
Using Channel View
The four processing sections make up the complete channel strip. For details about the processors, refer to the
Controls chapter later in this user guide.
The Channel View is also used to navigate to buckets and to assign the current DAW track to a bucket.
Track Assignment Menu— Use this drop-down menu to assign the
current track to a selected bucket.
Bucket Name— Displays the bucket that the current track is
assigned to.
Go to Bucket View
The DAW track of this MixHub insert is displayed at the top of the
Input module.
A
SSIGNING TRACKS TO BUCKETS IN THE
C
HANNEL
V
IEW
You can use the Channel View to assign the current track to a bucket. This involves first selecting a DAW track and
then assigning it to a bucket, as opposed to the Buckets view, where you first select a bucket and then assign tracks
to it.
1. Select a DAW track to focus on.
2. Go to Channel View. If you like rearrange module order by dragging.
3. Open the Assign to Bucket menu and select the bucket you want to send the track to. If the track is already
assigned, it will move from its previous location.
4. The bucket to which the track is assigned appears in the box below. Double-click to rename it.