Waves CLA MixHub Software Plug-In - Manual (Page 25)

CLA MixHub / User Guide
25
SC Listen Mode Select (separate L and R on stereo tracks) G = gate listen; C = compressor listen
SC Route —Sets the signal path from the side chain EQ and the dynamics processors.
FLTR to —Sets whether the filter signal is sent to the Gate/Exp/Duck side chain OR to the compressor side
chain (not both).
EQ to —Sets whether the EQ signal is sent to the Gate/Exp/Duck side chain OR to the compressor side
chain (not both).
FLTR+EQ to DYN —Assigns side chain EQ and filters to the entire dynamic section.
Link —Couples the left and right channel controls of a stereo track (stereo modules only).