Waves CLA MixHub Software Plug-In User Manual
Page 23
CLA MixHub / User Guide
23
Gate Hold
—Defines the amount of time the Gate/Exp/Ducker will wait before going into release, after the
signal drops below the threshold.
Gate Release
—Controls the release time of the Ducker.
Comp Mix
—Controls the balance between the uncompressed and compressed signal in the compressor.
EXT SC
—
Enables an external side chain if an active side chain signal is patched. Pro Tools supports only
one side chain channel.
SC EQ
—Turns the SC filter and EQ sections on an off. These are adjusted in the Dynamics expanded
section. Click the Expand button at the top of the Dynamics module to open the view.
The SC EQ button is inactive until any variable control in the Side Chain EQ section has been set to a
value other than zero. Once a variable control has been adjusted, you can use the SC EQ button turn
side chain EQ processing on or off.