Neumann MT 48 Desktop 12x12 USB-C Audio/MIDI Interface - Manual (Page 25)

MT 48 | 25
Pressing on a Group channel name opens a different menu:
• MUTE silences the entire group with all contained channels .
• EXPAND/COLLAPSE displays or hides all channels contained in this group .
• NAME lets you rename the group .
• CLEAR GROUP dissolves the group . This does not remove the channels contained in the
group, they will be displayed as individual channels in the mixer .
Strips setup
STRIPS SETUP allows you to configure the MT 48 mixer to your needs . Please note that changes
to the Strips Setup apply to all four mixers .
X Go to MENU → STRIPS SETUP
Here you can disable channel strips or enable channel strips that are currently hidden (dis-
abled) . If you enable more strips than the screen can display (eight), you can reach the addi-
tional channels by swiping .
You can also re-arrange channel strips in a new order . When you press on a strip, arrows
appear that allow you to move the respective strip to the left or right .