Neumann MT 48 Desktop 12x12 USB-C Audio/MIDI Interface - Manual (Page 29)

MT 48 | 29
Please note that when you press on a rotary control (e .g . preamp gain or REV level) to change
its value, a panel opens with a slider . This is to facilitate using the Web Control from a touch-
screen device, e .g . a tablet computer .
Controlling the MT 48 from your tablet
The Web Control can be used to remote control the MT 48 from another computer . However,
this requires the MT 48 to be part of your home network .
A typical use case would be to remote control mixes from one or more tablet computers so the
artist(s) can adjust their own monitor mix .
To accomplish this, connect the MT 48’s AES67 port to your WiFi router via a CAT5 or CAT6
ethernet cable . If that’s not possible, you can also connect the MT 48 to a WiFi extender that
has an ethernet port .
To find out the web address of your MT 48, go to the MT 48 AGENT, i .e . the Neumann logo in
the menu bar/taskbar of your computer and select OPEN WEB CONTROL . Please note that you
must deactivate WiFi on your computer as you are already connected to your home network
via the MT 48 . The web address in your browser window will work on any web device within
your network .