Neumann MT 48 Desktop 12x12 USB-C Audio/MIDI Interface - Manual (Page 5)

MT 48 | 5
System requirements
Windows Mac
Windows 10 64-bit or Windows 11 64-bit macOS 10 .15 to 13 .x
(Catalina – Big Sur – Monterey – Ventura)
Software Requirement:
MT 48 Toolkit must be installed . Intel and Apple Silicon platforms supported
Driverless:
Plug and Play supported on macOS .
Installation of MT 48 Toolkit required for
full functionality .
Overview
• TFT LCD : The MT 48 features a capacitive touch display .
• Home button with the Neumann diamond for navigation purposes .
• Multi-function Rotary Control for parameter value changes .
• Selector Buttons : Pressing the Speakers A, Speakers B, Headphone 1 and Headphone 2 but-
tons selects one of four separate Mixers for each output pair and assigns the large Rotary
Control to volume control for the selected stereo output .
• Mute Control : Pressing the mute button silences the selected stereo output, pressing the
mute button for more than 2 seconds mutes all outputs .
• Talkback Control : A Talkback function is integrated . Pressing the Talkback button activates
the built-in Talkback Mic, which is below the pinhole* located between the Home and Speak-
ers A buttons .
CAUTION
Damage to the product
Avoid touching the built-in microphone or applying pressure while engaged .
X Do not insert any object or liquid into the hole, or use a vacuum over the mic hole as it
could permanently damage the microphone .
• Bottom Panel
3/8” thread for mounting the MT 48 on a mic stand
TFT LCD
Multi touch display
Home Button
Access to main menu
and settings
Built-in Microphone
Talkback Speaker Set Selectors
Configurable
Headphone Selectors
Configurable
Mute Control
Configurable
Talkback Control
Configurable
Multi-function Rotary Control
Volume and gain control/
Settings