Native Instruments KOMPLETE KONTROL S88 MK2 88-Key Controller for KOMPLETE - Manual (Page 215)

14 Controlling Instrument and Effect Parameters
This section introduces you to controlling Instrument and Effect parameters using the KOM-
PLETE KONTROL keyboard and explains how to customize parameter mappings.
14.1 About Pre-Mapped Instruments and Effects
All KOMPLETE and NKS Instruments and Effects are pre-mapped, which means that the key-
board’s knobs and Touch Strips are automatically assigned to key parameters as soon as you
load an Instrument in KOMPLETE KONTROL. You do not have to manually configure a map-
ping or assign knobs via MIDI learn.
You can customize the parameter mapping for each Preset file in the Plug-in Panel of the KOM-
PLETE KONTROL software. For more information, refer to
↑ 14.4, Customizing Parameter Mappings
using the Plug-in Panel .
14.2 Adjusting Parameters
Once you have loaded an Instrument, the eight knobs on the keyboard are automatically as-
signed to eight Instrument parameters. Whenever you turn a knob on the KOMPLETE KON-
TROL keyboard, the mapped parameter visually reflects the movement in the KOM-
PLETE KONTROL software.
► To adjust an Instrument parameter, turn the corresponding knob on the keyboard. The
mapping of each knob is indicated by the displays.
Controlling Instrument and Effect Parameters
About Pre-Mapped Instruments and Effects
KOMPLETE KONTROL S-Series - Manual - 215