DJI O3 Air Unit - Manual (Page 11)

© 2022 DJI All Rights Reserved.
9
DJI O3 Air Unit User Manual
1. Power on the air unit, the goggles, and the remote controller.
2. Press the link button of the air unit and the goggles respectively. The linking status indicator of the air
unit blinks red and the goggles start to beep continually.
3. Make sure the distance between the air unit and the goggles is within 0.5 m. Once linking is
successful, the linking status indicator of the air unit turns solid green. The goggles stop beeping and
the live view will be displayed.
4. Press the link button of the air unit and the linking status indicator of the air unit blinks red. Press and
hold the power button of the remote controller. The remote controller starts to beep continually and
the battery level LEDs blink in sequence.
5. Make sure the distance between the air unit and the remote controller is within 0.5 m. Once linking is
successful, the linking status indicator of the air unit turns solid green and the remote controller stops
beeping.
Operating Channel
This product supports two channel modes: manual and auto. The channel mode can be set in the
goggles menu as follows:
Open the goggles menu, select Transmission > Channel Mode, and then select Auto or Manual
according to the actual situation.
In auto mode, the channel with the strongest signal (between 5.725 GHz and 5.850 GHz) will be
automatically selected.
In manual mode, the channel can be manually selected from the following bandwidths:
Bandwidth Channel and the Corresponding Central Frequency
40 MHz Channel 1: 5794.5 MHz
20 MHz
Channel 1: 5768.5 MHz
Channel 2: 5804.5 MHz
Channel 3: 5839.5 MHz
10 MHz
Channel 1: 5768.5 MHz
Channel 2: 5804.5 MHz
Channel 3: 5839.5 MHz
Make sure you fully understand and abide by local laws and regulations before using this
product.
Some channels may not be available in some countries due to local legal restrictions.
Power on and connect the air unit to a computer and run DJI Assistant 2. The air unit will update to the
radio mode of the current region automatically. When the goggles or remote controller are connected to
the air unit,the region of their radio modes will also update automatically.