Maintenance, Parts replacement – DJI O3 Air Unit User Manual

Page 16

Advertising

Maintenance

Parts Replacement

Be careful not to damage the parts or connectors when replacing.

Camera Module (Coaxial Cable Included)

1. Loosen the two screws that secure the

cover of the coaxial cable connector, then

remove the cover.

3. Prepare the new camera module (with the

coaxial cable) and connect the coaxial

cable to the air unit. Make sure the cable

is connected firmly.

2. Use an appropriate tool (tweezers) to

disconnect the cable from the air unit and

then remove the camera module with the

coaxial cable.

4. Reinstall the cover and tighten the screws.

After replacing the camera, use an external power supply to power on the air unit. Connect the

air unit to a computer and launch DJI Assistant 2 to update the camera calibration file.

Advertising