DJI O3 Air Unit - Manual (Page 5)

© 2022 DJI All Rights Reserved.
3
Warning
The air unit may become hot during or after operation. DO NOT touch the air unit before it cools
down.
DO NOT use the air unit for an extended period in high-temperature environments with poor
ventilation. This may lead to overheating and loss of image transmission.
Mount the air unit on the aircraft with good ventilation and heat dissipation. DO NOT install
the air unit in an enclosed area. Otherwise, the air unit will overheat during use and the image
transmission may be lost.
When the air unit is powered on, it automatically enters the low-power state to avoid
overheating, which negatively affects image transmission performance. Once the aircraft takes
off or the recording starts, the air unit automatically exits the low-power state and resumes
normal image transmission performance. Make sure to take off as soon as possible or the air
unit is well ventilated.
Make sure that the external power supply for the air unit is a lithium battery (2S-6S) with an input
power between 7.4-26.4 V. Otherwise, the air unit may work abnormally or be damaged.
DO NOT connect the power cable with the power GND cable directly or plug or unplug the
cables after the air unit is powered on. Otherwise, the equipment may be damaged.
DO NOT obstruct or twist the antenna of the air unit. Otherwise, the transmission may be
affected or blocked.
Follow the instructions in the quick start guide or user manual when installing the air unit.
Incorrect installation may cause abnormal performance or even damage to the air unit.
Keep all electronic devices as far away from each other as possible during installation to
minimize electromagnetic interference.
Make sure that all connections are secure and all parts are working properly.
Make sure that there are no other transmitting devices in the surrounding area that may
cause interference. DO NOT use the same frequency band as other devices. Otherwise, the
transmission performance will be affected.
Make sure that there are no other transmitting devices in the surrounding area that may
cause interference. DO NOT use the same frequency band as other devices. Otherwise, the
transmission performance will be affected.
Make sure you fully understand and abide by local laws and regulations before using this
product.
This product is not intended for children.