Philips VoiceTracer Audio Recorder - Manual (Page 20)

20
Record Table of contents
5.1.1 Displaying the remaining recording time
1 In stop mode press the stop key j .
X The remaining recording time in the memory is shown in
hours and minutes.
5.2 Starting recording automatically
The following methods are available for automatic starting of
recording: Voice activation.
5.2.1 Using voice activation
When voice-activated recording is enabled, recording will start
when you begin speaking. When you stop speaking, the device will
automatically pause recording after three seconds of silence, and
resume only when you begin speaking again.
1 Customize the voice-activated recording settings in the Settings
menu and turn on the feature
(see also chapter 8.1.4 Enabling/
disabling voice-activated recording, page 26) .
X If this feature is on, the } symbol is displayed.
2 Press the g key.
X The devices switches to standby mode. The symbol for a
paused recording is shown on the display. Recording will start
when you begin speaking. When you stop speaking, the device will
automatically pause recording after three seconds of silence.
3 Press the j key to stop recording.
X The device returns to stop mode.