Philips VoiceTracer Audio Recorder - Manual (Page 31)

31
Service Table of contents
9.1.3 Displaying the remaining memory space
1 In stop mode (start-up screen), press MENU for at least two
seconds.
2 Press e to select the REMAIN function.
X The remaining memory space in megabytes is shown on the
display.
3 Press the j key to exit the menu.
9.2 Replacing batteries or rechargeable batteries
Caution
• Do not remove batteries or rechargeable batteries from the device
while it is recording. If you do this, data may be damaged or lost.
Device malfunctions may also occur.
When the batteries are nearly empty, the battery indicator blinks; you
should replace them.
Proceed as described in
4.1 Inserting the batteries .
Note
• If it takes longer than 2 minutes to replace the batteries, you may
have to reset the time.
• Never try to recharge alkaline or non-rechargeable batteries.
• Batteries and rechargeable batteries contain substances that
may pollute the environment. Used batteries and rechargeable
batteries should be disposed of at an official collection point.
9.3 Updating the firmware
Your device is controlled by an internal program called firmware. As
a part of ongoing product maintenance, the firmware is upgraded and
errors are corrected.
It is possible that a newer version (an "update") of the firmware has
been released since you purchased the device. In this case you can
easily update your device to the latest version.
You can find more information under www.philips.com/dictation .
9.3.1 Displaying the firmware version
1 In stop mode (start-up screen), press MENU for at least two
seconds.
2 Press e to select the REMAIN function.
3 Press MENU for at least two seconds.
X The version number and date of the firmware is indicated on
the display.