5 monitoring during recording, 6 setting auto divide, 2 device settings – Philips VoiceTracer Audio Recorder User Manual
Page 27: 1 enabling/disabling key and signal tones, Setting auto divide
27
Settings
8.1.5 Monitoring during recording
Using this feature you can listen to the current recording using the
headphones
(see also chapter 4.5.1 Connecting the headphones, page
.
1
In stop mode (start-up screen), press
MENU
for at least two
seconds.
2
Press
e
to select the
LISTEN
function.
3
Press
h
/
b
ON
or
OFF
, to switch the feature on or off.
4
Press the record key,
g
, to confirm.
5
Press the
j
key to exit the menu.
Tip
• Press the
j
key to cancel the operation without saving and return
to the stop mode.
8.1.6 Setting auto divide
You can automatically divide large recordings, such as a multi-hour
meeting recording. Once the set time has been reached, the device
stops the current recording and automatically starts a new one.
1
In stop mode (start-up screen), press
MENU
for at least two
seconds.
2
Press
e
to select the
DIVIDE
function.
3
Press
h
/
b
, to select whether longer recordings are to be
automatically divided after
30
or
60
minutes, or switch the feature
off.
4
Press the record key,
g
, to confirm.
5
Press the
j
key to exit the menu.
Tip
• Press the
j
key to cancel the operation without saving and return
to the stop mode.
8.2 Device settings
8.2.1 Enabling/disabling key and signal tones
1
In stop mode (start-up screen), press
MENU
for at least two
seconds.
2
Press
e
to select the
BEEP
function.
3
Press
h
/
b
, to enable/disable the key and signal tones.