Check 2: set the display size to 100 – Canon PIXMA MG2525 All-in-One Inkjet Printer (Black) User Manual
Page 167
Scan Quality (Image Displayed on the Monitor) Is Poor
Check 1: Increase the scanning resolution if the image is
jagged.
Check 2: Set the display size to 100 %.
Some applications do not display images clearly if the display size is too small.
Check 3: If moire (stripe pattern) appears, take the following
measures and scan again.
• Set one of the following settings in the
Settings (Document Scan)
dialog,
Settings
(Custom Scan)
dialog, or
Settings (Scan and Stitch)
dialog of IJ Scan Utility, then
scan from the IJ Scan Utility main screen.
- Set
Select Source
to
Magazine
and set
Color Mode
to
Color
- Select the
Reduce moire
checkbox in
Image Processing Settings
Settings (Document Scan) Dialog
Settings (Custom Scan) Dialog
Settings (Scan and Stitch) Dialog
• Click
Driver
in the IJ Scan Utility main screen, then set one of the following settings.
- Select
Magazine
for
Image Adjustment
- Select the
Descreen
checkbox
Refer to "
Image Corrections and Color Adjustments
Note
If moire appears when you scan a digital print photo, take the above measures and
scan again.
Check 4: Clean the platen and document cover.
Check 5: If the item is in poor condition (dirty, faded, etc.), click
Driver in the IJ Scan Utility main screen, then set Reduce Dust,
Fading Correction, Grain Correction, etc.
Refer to "
Image Corrections and Color Adjustments
Check 6: If the color tone of images is different from the original
document, take the following measures and scan again.
• Click
Driver
in the IJ Scan Utility main screen, then set
Image Adjustment
to
None
.
167