Canon PIXMA MG2525 All-in-One Inkjet Printer (Black) User Manual
Page 291
Color balance (Cyan, Magenta, Yellow)
If necessary, adjust the strength of each color. To strengthen a color, drag the slider to the
right. To weaken a color, drag the slider to the left.
You can also directly enter a value linked to the slider. Enter a value in the range from -50
to 50.
Adjusting the color balance will result in variations in the balance among the volumes of the
individual color inks and hence in the hues of the document as a whole.
Use the printer driver only when adjusting the color balance slightly. To change the color
balance significantly, use the application software.
Brightness
Select the brightness of printed images.
You cannot change the levels of pure white and black. You can change the contrast of the
colors between white and black.
Intensity
Select this method to adjust the overall density of your print.
To increase the overall intensity, drag the slider to the right. To decrease the overall
intensity, drag the slider to the left.
You can also directly enter a value linked to the slider. Enter a value in the range from -50
to 50.
Contrast
The Contrast function changes the differences between light and dark in images during
printing.
To make the differences between the light and dark portions of images greater and more
distinct, increase the contrast. On the other hand, to make the differences between the light
and dark portions of images smaller and less distinct, reduce the contrast.
You can also directly enter a value linked to the slider. Enter a value in the range from -50
to 50.
Important
When the
Grayscale Printing
check box is checked for
Quality & Media
, the color
balance (
Cyan
,
Magenta
,
Yellow
) appear grayed out and are unavailable.
If you select
ColorSync
for
Color Matching
, then the color balance (
Cyan
,
Magenta
,
Yellow
),
Brightness
,
Intensity
, and
Contrast
appear grayed out and are unavailable.
Related Features
291