Data-Tronix 4-Input IPTV Encoder Modulator (1 RU) - Manual (Page 10)

DT-IPTV-QAM-ASI-4HC | Manual V1.0 | 06112019
10
Encoder Setup Page of DT-IPTV-QAM-ASI-4HC
Encoder Setup page allows the integrator to select and set the parameters needed for each stream.
1. Select the “Edit” Icon:
2. Select and set the specific parameters settings as required.
Note: you can select and set all the parameters for all the encoders at one time.
3. After setting all the required parameters- Select the edit icon again .
Note: All changed parameters will be shown in red . Pictured Below.