Ip streaming setup, Enabling ip streams, Disabling ip streams – Data-Tronix 4-Input IPTV Encoder Modulator (1 RU) User Manual
Page 11
DT-IPTV-QAM-ASI-4HC | Manual V1.0 | 06112019
11
4.
Select
“Active/Inactive” to activate f
or remaining parameters as required.
5.
Select
“
Save and Confirm
” to save all changed parameters.
6.
Select
“Apply” in the pop
-up window.
IP Streaming Setup
Streaming Setup Page of DT-IPTV-QAM-ASI-4HC
Enabling IP Streams
1.
Enable
the Stream by selecting the check box 1-4.
Note: All streams can be enabled at the same time by using the “master” checkbox.
2.
Enter
the stream Destination IP [example: udp://224.1.1.4:1234].
3.
Set
the TTL value.
4.
Select
‘Save and Confirm’ once all the streams are setup.
Disabling IP Streams
The DT-IPTV-QAM-ASI-4HC offers the user a SPTS output stream.
Each Stream can be disabled as required.
To disable an IP Stream
“
uncheck”
the checkbox in front of the
appropriate IP Stream_ID (1-4).