Installing the transparency guide – Epson 1640XL User Manual
Page 122
Advertising
6-6
Options
R4C5460
Rev. C
A5 size
OPTIONS.FM
12/4/00
Pass 3
L
Proof Sign-off:
C.Fujiwara
_______
M.Fujimori
_______
J.Hoadley
_______
Installing the transparency guide
Follow the steps below to install the transparency guide, which is
required to use all of the film holders and to scan transparencies.
1. Open the Transparency Unit.
2. Insert the guide pin and the adjust pin. Make sure the adjust
pin’s arrow faces directly towards the center of the guide pin.
Note:
These pins are the same as the ones provided with the scanner, so
you do not need to change them if they are already installed.
guide pin
adjust pin
Advertising