Epson 1640XL - Manual (Page 32)

2-10 Setting Up the Scanner
R4C5460
Rev. C
A5 size SETUP.FM
12/4/00 Pass 3
L Proof Sign-off:
C.Fujiwara
_______
M.Fujimori _______
J.Hoadley _______
Connecting the scanner
Connect the scanner to your computer or to another SCSI device
as follows:
Note:
The combination of connectors on the SCSI interface cable you need
varies depending on the maker of your SCSI device and SCSI interface
board.
1. Make sure the scanner, computer, and all other SCSI devices
are turned off and unplugged from the power source.
?
Caution:
Do not connect the scanner to the computer or other devices
while they are turned on as damage may occur.
The scanner is the last device in the daisy chain
(other SCSI device)
terminator on
The scanner is in the middle of the daisy chain
terminator off
(other SCSI device)