Installing the ieee 1394 scanner i/f card in, Your scanner -36 – Epson 1640XL User Manual
Page 152
6-36
Options
R4C5460
Rev. C
A5 size
OPTIONS.FM
12/4/00
Pass 3
L
Proof Sign-off:
C.Fujiwara
_______
M.Fujimori
_______
J.Hoadley
_______
Installing the IEEE 1394 Scanner I/F Card in your
scanner
To use your scanner as an IEEE 1394 device, you need to install
the optional IEEE 1394 Scanner I/F Card.
1. Turn off the scanner. Unplug any power cords, then
disconnect all cables from the back panel of your scanner.
2. Use a cross-head screwdriver to remove the two screws
securing the shield plate to the optional interface slot; then
remove the plate. Be sure to keep both screws; you may need
to use them again if you re-install the shield plate.
M
Caution:
Static electricity can damage electronic components.
Discharge static electricity by touching the metal frame of
your scanner before handling the interface board.