Epson 1640XL - Manual (Page 93)

4
Using Your Scanner 4-27
R4C5460
Rev. C
A5 size USING.FM
12/4/00 Pass 3
R Proof Sign-off:
C.Fujiwara
_______
M.Fujimori _______
J.Hoadley _______
3. Install the pins in the scanner’s screw holes through the
document guide’s holes. The guide pin screws into the left
hole and the adjust pin screws into the right hole. (See page
4-24)
4. Turn the document guide over, and lay it on the document
table with the document guide holes over the screw holes in
the scanner. Make sure the larger document guide hole is on
the right and your document faces down.
5. Close the cover and scan the image.
Note:
If the scanned image appears slanted, turn the adjust pin using a
screwdriver to correct the angle of the document.