Setting the terminator switch, Setting the terminator switch -9 – Epson 1640XL User Manual
Page 31
Advertising
2
Setting Up the Scanner
2-9
R4C5460
Rev. C
A5 size
SETUP.FM
12/4/00
Pass 3
R
Proof Sign-off:
C.Fujiwara
_______
M.Fujimori
_______
J.Hoadley
_______
?
Caution:
Do not set the SCSI ID to an ID number that is already assigned
to another device otherwise the computer, scanner, and other
devices will not operate properly.
Setting the terminator switch
The scanner has a built-in terminator, which allows SCSI devices
to communicate properly with each other. You may need to
change the terminator switch setting according to your computer
system.
Note:
Do not use an external terminator.
The terminator switch is
located at the back of
the scanner.
Only the scanner is connected
terminator on
Advertising