Enterasys Networks X-Pedition XSR CLI - Manual (Page 118)

File System Commands
3-112 Configuring the XSR Platform
Mode
Privileged EXEC: XSR#
Default
flash: unless you change the default using the cd command.
Example
XSR#dir flash:
Sample Output
The following is sample output from an XSR 1800 Series router:
XSR#dir flash:
Listing Directory flash:
size date time name
817496 SEP-17-2002 15:21:32 bootrom1_18.fls
3220453 SEP-17-2002 15:24:08 xsr1800.fls
976 SEP-23-2002 16:02:08 startup-config
308 SEP-17-2002 15:26:14 user.dat
572 SEP-23-2002 14:50:32 cert.dat
0 SEP-23-2002 14:24:56 leases.cfg
64 SEP-23-2002 14:50:30 dhcpd.cfg
0 SEP-23-2002 14:24:56 leases.cfg.bak
2,328,576 bytes free
6,381,568 bytes total
more
This command shows a file’s contents in ASCII format by default or hexadecimal (binary) format.
Syntax
XSR#more [/ascii | /binary | flash: | cflash:]filename
Mode
Privileged EXEC: XSR#
/ascii File read in flat ASCII text.
/binary File read in Hexadecimal format.
flash: File residing in the On‐Board Flash directory.
cflash: File residing in the CompactFlash directory.
filename Name of the file to be displayed.