Enterasys Networks X-Pedition XSR CLI - Manual (Page 403)

Multilink Show Commands
XSR CLI Reference Guide 8-133
Rx Stats
Tx Stats
show ppp interface dialer x mlpppgroup x bap
This command displays BAP multilink bundle statistics of a specific bundle under the dialer
interface. You can view individual multilink bundles when more than one exists on the dialer
interface.
Syntax
show ppp interface dialer <number> mlpppgroup <number> bap
Mode
EXEC: XSR>
Sample Output
The following is sample output from the command:
********** MLPPP Bundle Stats **********
Dialer1: MLPPP is Admin Up / Oper Up
Group Num: 1
LCP State: OPENED
IPCP State: OPENED
Total Sum of fragments received for this class.
Discard
SeqError Sum of received fragments discarded for this class because sequence number is
out of order over this member link.
FlistFull Sum of received fragments discarded for this class over this member link
because fragment list is full.
Seq<Exp Sum of received fragments discarded for this class over this member link
because sequence number is less than expected.
NoBgnFlg Sum of received fragments discarded for this class over this member link
because no BEGIN flag is deteced.
AddFgFail Sum of received fragments discarded for this class over this member link
because fragment can not be added to the fragment list.
CleanQ Sum of received fragments discarded for this class over this member link while
cleaning the interface.
Total Sum of fragments transmitted for this class under this member link.
Discard CleanQ Sum of transmission fragments discarded for this class under this member
link during interface cleaning.
Qfull Sum of transmission fragments discarded for this class under this member
link because transmission queue is full.
number Dialer interface number, ranging from 0 to 255.
number Multilink bundle number, ranging from 0 to 255.