Epson 800p - Manual (Page 21)

Setting Up the Projector 15
Connecting to Video Sources
You can connect a DVD player, VCR, camcorder, laser disc player,
digital camera, or any other compatible video source to your projector.
The projector supports HDTV, NTSC, PAL, and SECAM, and
automatically detects the video format.
The projector can receive composite video, S-Video, and component
video. You can connect one or more of these video sources at the same
time.
The type of cable you use depends on whether you have composite
video, S-Video, or component video.
■ For composite video, use the RCA A/V cable included with the
projector.
■ For S-Video, use the S-Video cable supplied with your video
device or obtain one from your electronics dealer.
■ For component video, you’ll need a VGA-to-component video
cable. You can purchase this from EPSON; see page 8.
Component video connectors are usually colored green, blue, and
red.
See the following illustration if you’re not sure which type of
connectors you have.
Follow the instructions below for your type of connection.
note
The projector does not
support TV antenna cable
F-connectors.
S-Video
4-pin, mini-DIN
composite video
RCA connector