Epson 800p - Manual (Page 75)

Solving Problems 69
4. Highlight a solution (if this choice is available). Then press the
button to select the solution.
Press the Esc button if you need to back up.
If the solution is to adjust one of the settings, press either
the
Tracking– or Tracking+ button on the projector (or
use the button on the remote control) to adjust it.
5. To exit the Help system, press the blue ? Help button.
If none of the suggestions solves your problem, see additional
solutions to problems in the following sections.
What To Do When the Lights Flash
The lights on top of the projector indicate the projector’s status and
let you know when a problem occurs.
If the projector is not working correctly, first turn it off, let it cool,
and unplug it. Then plug the power cord back in and turn on the
projector. If this does not solve the problem, check the status lights on
top of the projector and try the solutions recommended on the
following pages.
power light lamp light temperature
light