Epson 800p - Manual (Page 29)

Using the Projector 23
If the Arrange option isn’t available, you may need to select one of the
Simulscan resolution settings:
1. Click the Monitor icon.
2. Select a Simulscan resolution as shown. (Allow a few seconds for
the projector to sync up after making the selection.)
If you’re using a PC laptop:
■ Press the function key that lets you display on an external
monitor. It’s often labelled with an icon such as
but it may
also be labelled CRT/LCD . You may have to hold down the Fn key
while pressing it. Check your laptop’s manual or online help for
details.
On most systems, the key lets you toggle between the LCD
screen and the projector, or display on both at the same time.
Allow a few seconds for the projector to sync up after pressing it.
■ Depending on your computer’s video card, you might need to use
the Display utility in the Control Panel to make sure that both the
LCD screen and external monitor port are enabled. See your
computer’s documentation or online help for details.
select a
Simulscan
resolution
click here