Epson 800p - Manual (Page 71)

Maintaining and Transporting the Projector 65
Resetting the Lamp Timer
After you replace the lamp, you need to reset the lamp timer using the
projector’s menu.
1. Press the Menu button on the control panel or the remote
control. You see the main menu.
2. Use the Sync– button (control panel) or the button (remote
control) to highlight About .
You see the lamp usage hours and other settings.
3. Press to select Reset Lamp Timer. Press again. You see this
prompt:
4. Select Yes , then press .
5. When you’re finished, press Esc or Menu .