Epson 800p - Manual (Page 58)

52 Fine-tuning the Projector
4. Use the Tracking and Sync buttons (control panel) or the
button (remote control) to select the area of the image you want
to use. Then press .
5. When you see the message “Do you use this image?” select Yes
and press .
You see the screen shown at the left.
6. Use the Tracking and Sync buttons (control panel) or
the button (remote control) to select a zoom rate (display
size), and then press .
7. When the message “Do you save the user’s logo?” appears, select
Yes and press .
Saving the logo may take a few moments. Do not use your
projector or video source (computer, DVD player, etc.) while the
logo is being saved.
8. When you see the message “Saving the user’s logo is completed,”
press Esc to return to the menu screen.
Choosing When to Display the Image
After your image is saved, you can set it up as the no-signal message
and/or the screen that’s displayed when you press
A/V Mute .
1. Press the Menu button to display the menu screen (if not already
displayed).
2. Use the Sync– button (control panel) or the button
(remote control) to highlight the Setting menu.
3. Press the button to select the Setting menu.
4. Use the Sync– button (control panel) or the button
(remote control) to highlight either No-Signal Msg . or A/V
Mute , depending on when you want the image to display.
5. Use the Tracking+ button (control panel) or the button
(remote control) to select Logo . This sets your image as the screen
to be displayed.
6. When you’re finished, press Esc or Menu to exit.
User's Logo Capture
Set the zoom rate.
zoom rate :
:Select :Return :Execute
100 200 300
note
You can also set up your
image as the startup screen
using the Advanced menu; see
page 55.