HP 441877-00B User Manual
Page 163
Diagnostics 163
o
Example: q57diag.exe -bus 5
Program tests UUTs on bus 5
•
-dpmi
o
Specifies the use of DPMI memory allocation
o
Uses DPMI memory allocation method to allocate memory instead of malloc() or free().
•
-dir
o
Displays the version of the IPMI (Intelligent Platform Management Interface)
•
-errctrl <c>
Specifies action on error -> a:abort, w:wait, l:loop, c:continue, s:skip
•
-com <value>
Enables com port value (1..4)
•
-ems <size>
Specifies external memory size in HEX to tst
•
-ref
Runs test with reference device
•
-findref
Detects reference device
•
-fmac
Enables input of Mac address from a file
•
-lbm <n>
Sets Mac loopback packets
•
-lbp <n>
Sets Phy loopback packets
•
-lbe <n:n:n>
o
Sets external loopback packets
o
Format: <1000Mbps:100Mbps:10Mbps>
•
-mba <value>
o
Enables/disables MBA
o
Value = 0 to disable; Value = 1 to enable
•
-mbap <value>
o
Selects MBA protocol
o
Value = 0 for PXE; Value = 1 for RPL; Value = 2 for BootP
•
-mbas <value>
o
Selects MBA speed
o
Value = 0 for auto; Value = 1 for 10HD; Value = 2 for 10FD; Value = 3 for 100HD; Value = 4
for 100FD; Value = 6 for 1000FD (fiber)
•
-firm <file>
Updates device eeprom based on <file> image match