HP 441877-00B User Manual
Page 60
Firmware upgrade utility 60
•
HP NC7761 PCI Gigabit Server Adapter
•
HP NC7780 Gigabit Server Adapter
•
HP NC7781 PCI-X Gigabit Server Adapter
•
HP NC7782 Dual Port PCI-X Gigabit Server Adapter
IMPORTANT:
For each server adapter in the target server, the driver for the adapter must be
installed and enabled for the server adapter to be upgraded. If the driver is unable to
communicate with the server adapter, the server adapter cannot be updated.
IMPORTANT:
Before updating NC6770 or NC7770 server adapters, move jumper J1 to the
Enable position. After updating each server adapter, move jumper J1 to the Disable position.
NOTE:
NC6770, NC7770, and NC7780 server adapters require about 15 minutes each to
update both the PXE and Boot Code.
NOTE:
To update the PXE code for embedded adapters update the system BIOS.
Drivers
For each server adapter in the target server, the driver for the adapter must be installed and enabled for
the server adapter to be upgraded. If the driver is unable to communicate with the server adapter, the
server adapter cannot be updated.
Upgrading firmware
1.
2.
Click
Software & Driver Downloads from the left menu bar.
3.
Type the product name in the
For product box and press Enter. For example, type NC370T.
4.
Select an operating system.
5.
Click
HP ProLiant Networking Software.
6.
Click
download and save the HP SoftPaq (sp#####.exe) file to a directory on your hard drive. The
SoftPaq file is a self-extracting executable with a file name based on the SoftPaq number.
7.
Click the SoftPaq file to extract the files and then open the
cmponent.htm file.
8.
Click the SoftPaq file (SP31728) located in the \apps\fwupgrade\dos directory.
9.
Execute the downloaded file and follow the on-screen instructions. After the files have been
unpacked, you may delete the SoftPaq file that you downloaded.
10.
Copy these files to a bootable DOS diskette.
7781V235 BIN
150TV318 BIN
6770V219 BIN
7760V237 BIN
7761V318 BIN
7770V219 BIN
7771V235 BIN
7780V219 BIN
1020V318 BIN