HP 441877-00B User Manual

Page 53

Advertising
background image

Firmware upgrade utility 53

Command Line Input

Result

nicfwupg_mf.exe -c

Displays the current firmware version of all
HP NC-Series Broadcom adapters in the
system

nicfwupg_mf.exe -l

Displays the latest version of HP NC-Series
Broadcom adapters in the system as
determined by versions shipped with the
component.

nicfwupg_mf.exe -a

Retuns the saved image version of HP NC-
Series Broadcom adapters in the system

nicfwupg_mf.exe -s

Suppresses console output

nicfwupg_mf.exe -f

Forces downgrades or restores as needed

nicfwupg_mf.exe -p

Requests a restore on all adapters

nicfwupg_mf.exe -e [MAC
Address]

Requests a restore on one adapter. Supply
the MAC address for the adapter.

nicfwupg_mf.exe -o [MAC
Address]

Performs an upgrade of boot code for one
adapter. Supply the MAC address for the
adapter.

nicfwupg_mf.exe -x [MAC
Address]

Performs an upgrade of PXE for one
adapter. Supply the MAC address for the
adapter.

nicfwupg_mf.exe -b [MAC
Address]

Performs an upgrade of CLP for one
adapter. Supply the MAC address for the
adapter.

nicfwupg_mf.exe -i [filename]

Performs an upgrade and stores the image
file to be used during a restore. Supply the
filename.

Return codes

When the upgrade utility has finished running, the component reports a return code to the operating
system or calling application. These return codes are processed by the %errorlevel% operating system
variable and are used to determine the status of a firmware upgrade procedure.

The following summarizes the return codes for the Smart Component installer and HP Online Firmware
Upgrade Utility commands.

Error level Meaning

0

Upgrade component failed to install

1

Upgrade component installed successfully

3

Upgrade component did not detect any supported network
adapters

4

Firmware upgrade was recommended, but the upgrade
component was instructed to not update the firmware

5

All firmware versions are current and an upgrade is not
recommended

6

At least one network adapter has firmware installed that is
newer than the available firmware.

Advertising