Locating a cartridge in the storage cells, Removing a cartridge from the hand, Locating a cartridge in the storage cells 127 – HP 20/700 User Manual

Page 128: Removing a cartridge from the hand 127

Advertising
background image

Chapter 4

Manual Operation 127

Chapter 4

Locating a Cartridge in the Storage Cells

Figure 3

on page 21 and

Figure 4

on page 22 show the locations of the

panels, rows, and columns of the cartridge storage cells in the library. The

decal at the top of each column also provides location information. To remove

a cartridge from a storage cell, slide out the cartridge.

Removing a Cartridge from the Hand

If the library loses power or goes offline, a cartridge might be left in the hand.

You can remove it from the hand and manually mount it into a drive for a

read/write operation.

Caution

Possible equipment damage: Follow the procedures described in

Moving the Robot

on page 124. Failing to do so could damage

the hand.

Make sure you do not touch any electronic components on the

hand assembly. The components could easily be damaged.

To remove a cartridge from the hand:
1. Rotate the Z-column; move the hand until it is facing the front door.
2. Push on the back of the reach mechanism (as shown in

Figure 35

on page

128) until the gripper is extended to its full position.

Advertising
This manual is related to the following products: