Powering on the library, Powering on the library 68 – HP 20/700 User Manual
Page 69
Advertising
68 Powering on the Library
Chapter 3
Powering on the Library
Powering on the library supplies power to the library electronics and to the
drive column. If you have a second drive column, you must power on both
supplies. Powering on also initiates an IPL of the library.
To power on the library, lift the switch (circuit breaker) or switches behind the
right front door of the library. If you are not familiar with the location of the
switches, refer to
Note
If the tape library does not power on, contact your service
provider.
Advertising
This manual is related to the following products: